MIKASE LABORATORY - PT MITRA KATIGA SEJAHTERA / SUPPLIER ALAT UJI KUALITAS UDARA, AIR, CUACA , KEBISINGAN SERTA GETARAN

Keterangan

HD2030 is a portable vibration analyzer performing spectral and statistical analysis on four channels simultaneously. The instrument measures all parameters required by current
regulations concerning workers protection from vibration related risks and is able to measure vibrations transmitted to both hand-arm and whole body.

Technical specifications of HD2030
• Technical standards:
ISO 8041: 2005 & ISO 5349-1: 2001 ( hand transmitted vibration)
ISO 2631-1, 2, 4 1997 ( whole body vibration)
IEC 61260: 1995 class 1 ( octave and third octave filters)
• Measurement modes:
Hand-transmitted vibrations
Whole-body vibrations
Building vibrations
• Measurement parameters:
RMS, VDV, MTVV, Peak, Max, Min
• Frequency weightings:
Fz, Fc, Wh for hand-transmitted vibrations
Fz, Fa, Wb, Wc, Wd, We, Wj, Wk for whole body vibrations
Fz, Fm, Wm for building vibrations
• Octave or third octave band spectral analysis:
The range of central frequencies depends on the chosen application according to the following table
Application
Central frequency range
Octave Band & Third Octave Band
Hand-Arm 4 ÷ 2000 3.15 ÷ 3150
Whole-Body 0.5 ÷ 250 0.315 ÷ 315
Building-Vibration 0.5 ÷ 250 0.315 ÷ 315
• Statistic Analysis The selected measurement parameter is analyzed in 1dB classes. Both
the probability and the percentile graphs can be shown.
• Measurement range 0.1m/ s2 ÷ 7000 m/ s2 with accelerometer HD356A02 for hand-arm measurements
• Linearity range three ranges of 80dB overlapped by 70dB
• Digital converter Four analog to digital converters with a resolution of 25 bits at 8k samples per second
• Inherent noise level Less than 30mm/ s2 with accelerometer HD356A02 for hand-arm
measurements and Wh filter
• Display Graphic backlit display 128x64 pixels Screens:
VL M1: Three parameters for each measurement axis
VL M2: Three parameters of acceleration vector calculated from the three right channel
input axes
VL M3: Three global parameters for each measurement axis
VL M4: Three global parameters of acceleration vector calculated from the three right channel input axes
PROFILE: Graphic profile of one parameter for each measurement axis with integration time programmable from 1s to 1 hour
SPECTRUM: Octave or third octave spectrum for each measurement axis with calculation of one wideband filter. The graph can show the spectrum of acceleration, velocity or displacement.
STATISTICS: the statistical distribution of the parameter chosen in PROFILE PERCENTILES: Percentile level graph of the parameter chosen in PROFILE.
• Memory 8MB Internal FLASH type memory and connector for memory card SD type up to
2GB.
• Interface Serial RS232 and USB type
• nput/ Output LINE output for the four measurement channels: 2Vpp F.S.
TRGIN electrically isolated input: instrument trigger used by external devices
TRGOUT 3V logic output: trigger output used by external devices
• Power supply Four alkaline batteries AA 1.5V type with 10 hour lifetime-
The instrument can use rechargeable batteries Ni-MH type. The HD2030 does not perform the function of charger.
• Ambient parameters Storage: -25° C ÷ 70° C relative humidity less than 90% without condensation
Operating: -10° C ÷ 50° C relative humidity less than 90% without condensation
• Weight and Dimensions 95mm X 240mm X 50mm, weight 680gr.